

Acrel AMC96L-E4 / KC Three Phase Multifunction AC Power Meter

Name: AMC96L-E4 / KC Three Phase Multifunction AC Power Meter
Brand: Jiangsu Acrel Electrical Manufacturing Co., LTD.

Acrel AMC series programmable intelligent electrical measuring instrument integrates the measurement of all power parameters (such as single-phase or three-phase current, voltage, active power, reactive power, apparent power, frequency, power factor, etc.), multi-rate energy measurement, Four-quadrant power metering, harmonic analysis, and power monitoring and assessment management. A variety of peripheral interface functions, using LCD display interface, through the panel keys to achieve parameter setting and control, very suitable for real-time power monitoring system.

Products

Video of Multi Function Power Meter

Application of AMC96L-E4/KC Three Phase Multifunction AC Power Meter

Full power monitoring of incoming, bus or critical feeders
Monitoring of automation devices and intelligent terminal systems in low-voltage cabinets
Substation, building or factory automation systems
Distribution Automation System in Industrial Enterprises
Factory power system automation and load control
Energy and Energy Efficiency Management System
Power Plant Electrical Energy Management System

Parameters of AMC96L-E4 / KC Three Phase Multifunction AC Power Meter

Technical parameter				Value
Input	Rated value			AC voltage:Three phaseAC 100V,400V,660V AC current:AC1A,5A;
	Overload			Voltage: 1.2 times rated value(continuous); 2 times rated value /1 second Current:1.2 times rated value(continuous); 10 times rated value /1 second
	Frequency			45Hz～65Hz
	Power consumption			Power consumption of each voltage,current input circuit is less than 0.5VA
Accuracy				0.5 class
Function		Display		LED or LCD
		Communication		RS485,Modbus-RTU protocol;(1 start bit,8 data bit,1 stop bit,no parity) Baud Rate 2400/4800/9600/19200 bps etc.
		Alarm		1 channel passive relay,contact capacity 3A/30VDC,3A/250VAC, Used for high,low,unbalance alarm etc.
		Analog		DC4~20mA,( load<500Ω) (note:Shielded wire is specially selected for the above signal input and output)
		switching		Input	4 channel or 2 channel dry contact Input,built in power supply
				Output	2 channel switching output,NO relay contact,capacity: 3A/30VDC,3A/250VAC
Auxiliary supply		Voltage range		AC/DC 85-265V
		Power consumption		<5VA
Insulation resistance				≥ 100MΩ
Power frequency withstand voltage				Between power supply set of terminals and signal input,output set of terminals 2kV/1min (RMS) Between the shell and all set of terminals(except the set of terminals reference voltage less than 40V) AC 4kV
Environment			Temperature	Operation: -10℃～+55℃Storage: -25°C ~+70°C
			Humidity	≤95%RH,no condensation,without corrosive gas
			Altitude	≤ 2500m