Acrel ADL200 Single Phase Din Rail Energy Meter

Diagram of ADL200 Single Phase Din Rail Energy Meter

ADL200 single phase energy meter current specification is 10 (80) A, directly access. The wiring torque for direct access should be 1.8N·m. The overall size of the meter is L*W*H: 90*36*65mm, the front panel has the corresponding silk screen, including Enter-wire,Out-wire, auxiliary function port number, LOGO, LCD display, buttons, etc.

Main Functions of ADL200 Single Phase Din Rail Energy Meter

Panel Overview of ADL200 Single Phase Din Rail Energy Meter

Main Parameters of ADL200 Single Phase Din Rail Energy Meter

Main Features of ADL200 Single Phase Din Rail Energy Meter

Dimension&Packagement of ADL200 Single Phase Din Rail Energy Meter

Outline Dimension

About Packagement

Wiring Instruction of ADL200 Single Phase Din Rail Energy Meter

PIN Overview

Wiring Diagram

Power Wiring: 1-phase 2-wire via direct connect

Communication Wiring: RS485 wired Communication with IoT Gateway

DIN Rail Installation of ADL200 Single Phase Din Rail Energy Meter

Application in IoT System

Benefits of ADL200 Single Phase Din Rail Energy Meter

• High precision, CE and MID certification

• Small size, light weight, easy to install

• Diverse functions,full electric parameter measurement

• Can realize wireless communication with gateway module

Use of ADL200 Single Phase Din Rail Energy Meter

• Installed in the distribution room and distribution cabinet

• Used for measuring electrical energy in a domestic meter box

• Measurement of electrical energy in school buildings

• Electricity measurement of shopping malls, supermarkets and other buildings

Common FAQ

Q: Could ADL200 be used in IoT Energy Monitoring System for factory or building?

A: ADL200 has standard RS485 interface and MODBUS-RTU communication protocol which allow it to be integrate with our IoT Energy Monitor Solution that can enable our users to remotely check all the data collect by energy meters like ADL200 on their mobile phone or PC. For more information, please Contact us or check in IoT Energy Monitoring Solution Introduction.

Q: Why is the reading on ADL200 different from actual value?

A: Check if the wiring was correct according to the wiring diagram of ADL200. The installation direction need to be according to the actual current direction.

Q: What is Multi-rate/tariff function? How does it work?

A: First,multi-rate/tariff function was designed to be used for billing system. Second, the electricity price of different time duration in a day is different in some country.

Energy meter with this function can measure the kwh data and assign them to several time duration in a day and put a label of spike/peak/flat/valley kwh on them respectively. And if such energy meter was connected to the billing system by using a IoT gateway, it can send the kwh data of different time duration which was with the label of spike/peak/flat/valley kwh to the billing system for calculating the electricity bill of different time duration in a day.

For example, the electricity price of spike kwh is 5 USD/1 kwh, and time duration of from 9:00 am to 11:30 am was labeled as spike kwh.
Then, if energy meter record 3 kwh used in total during 9:00 am to 11:30 am, it will send the data of 3 kwh with the label of spike kwh to the billing system, and the system calculate the electricity cost of 3x5=15USD in total from 9:00 am to 11:30 am.

Other Question? Please contact us and we will get back to you as soon as possible.